| Onderdeel nommer | NE133QUB-N01 |
| Handelsmerk | BOE |
| Grootte | 13.3 |
| Toepassing | 3D Printer |
| Resolusie | 38403×2160 |
| Samestelling | CELL , Oxide TFT-L |
| Helderheid | |
| CR | - |
| Kleure | Grayscale |
| Agterlig | No |
| Koppelvlak | eDP |
| vervaardiger | BOE |
| model naam | NE133QUB-N01 (BOE093B) |
| skerm grootte | 13.3 inch |
| tipe skerm | CELL , Oxide TFT-LCD |
| pixel nommer | 3840(3)×2160 (UHD) 332PPI |
| reëling | LCR Vertical Stripe |
| aktiewe area (mm) | 293.76 × 165.24 (H×V) |
| buitelyn (mm) | 297.76 × 173.04 × 1.25 (H×V×D) |
| ring area (mm) | - |
| behandeling | Antiglare (Haze 25%), Hard coating (3H) |
| helderheid | 0 cd/m² |
| kontras verhouding | - |
| kykhoek | 85/85/85/85 (Typ.)(CR≥10) |
| reaksie | 25 (Typ.)(Tr+Td) ms |
| goeie uitsig by | Symmetry |
| werksmodus | ADS, Normally Black, Transmissive |
| glas dikte | 0.50+0.50 mm |
| deurlaatbaarheid | - |
| kleurdiepte | Grayscale |
| agterlig | No B/L |
| massa | 167g (Max.) |
| gebruik vir | 3D Printer |
| herlaaitempo | 60Hz |
| raakskerm | Without |
| bestuurder ic lys | Built-in COG 6 source chips |
| sein tipe | eDP (4 Lanes) , eDP1.3 , HBR2 (5.4G/lane) , 40 pins Connector |
| spanningstoevoer | 3.3V (Typ.) |
| maks. graderings | Storage Temp.: -20 ~ 60 °C Operating Temp.: 0 ~ 50 °C |
| B133HAN02.0 | AUO | 13.3 | 1920×1080 |
| B133XW01 V0 | AUO | 13.3 | 1366×768 |
| B133XW04 V0 | AUO | 13.3 | 1366×768 |
| G133I1-L01 | Innolux | 13.3 | 1280×800 |
| L5F30812P00 | Epson | 13.3 | 1024×768 |
| LP133WH1-TLB1 | LG Display | 13.3 | 1366×768 |
| LP133WH2-TLB2 | LG Display | 13.3 | 1366×768 |
| LP133X09-A2 | LG Display | 13.3 | 1024×768 |
| LQ13X32 | SHARP | 13.3 | 1024×768 |
| N133I7-L01 | Innolux | 13.3 | 1280×800 |